Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Repair Across Fort Worth
Roof repair in Fort Worth usually runs between $350 and $1,800 depending on what failed, and most jobs are done in a single day once we’re on site. Whether hail cracked a few shingles near Ridglea Hills or a pier-and-beam home in Fairmount has flashing pulling away from the chimney, we’ll quote a written price before any work starts. If you’re staring at a water stain on the ceiling and want a straight answer about what it’ll cost, call (682) 990-0964 and you’ll get a live person, not a voicemail tree.
Why Birchbark Roofing Fort Worth Is Fort Worth’s Preferred Roof Repair Company
Fort Worth homeowners call us because our crews show up with shoe covers at the door and drop cloths through the hallway, then send you a photo of the completed clean-up before pulling out of the driveway. That’s the Cedarwell Care Promise, and it’s stamped on every job we do. Erik Lindgren runs our Fort Worth operation and holds every repair to the same standard: a written price in dollars before we climb the ladder, background-checked uniformed technicians, and a 365-Day Done Right Promise that says if the work isn’t right, we make it right. We work with materials from GAF, Owens Corning, and CertainTeed so repairs match what’s already on your roof, and we keep a live person answering the phone 24/7 for the nights when a storm rolls through and you need to talk to someone now.
Styles & brands we work with
Metal Roof Repair in Fort Worth
Metal roof repair in Fort Worth is usually a job for exposed fasteners, seam separation, or penetration flashing that’s given out after a decade of hail and heat. On the metal shop roofs near the Stockyards and the standing-seam porches on older Fairmount homes, we see two things repeatedly: neoprene washers on screws that have cracked from UV exposure, and panel seams that have loosened enough for wind-driven rain to push under. A Fort Worth homeowner needs this repair when they notice rust streaks below fasteners, water stains on the porch ceiling, or a persistent drip near the valley even after the gutter’s been cleared. Most metal repairs in Fort Worth run $450 to $1,400 depending on how many fasteners need replacing and whether we’re re-seaming panels.
Fastener and Seam Repairs
We don’t caulk over failed washers and call it done. We pull the bad fasteners, inspect the panel for wear, and replace with new screws and washers rated for the Fort Worth sun. Where seams have separated, we clean the lap, apply sealant, and re-fasten so the next March hailstorm doesn’t turn a small gap into a big leak.
Penetration and Flashpoint Renewal
Pipes, vents, and gas flues punching through a metal roof are the first points to fail. We remove old boots and collars, install new ones, and check the surrounding panel for hidden dents or cracks from past hail strikes. A $600 boot replacement today beats a $2,500 decking repair after a season of slow leaks.
Commercial Roof Repair in Fort Worth
Commercial roof repair in Fort Worth spans everything from patching a low-slope roof over a warehouse off I-35W to repairing pitch pans and edge metal on a storefront near TCU. Business owners call us when they see ceiling stains above inventory, water ponding after a summer storm, or membrane punctures from HVAC service calls. Most commercial repairs in Fort Worth fall between $600 and $2,500, with the bigger jobs involving multiple penetrations or fastener-backed membrane pulled loose by high winds. We’ll give you a written line-item price before we start, so you know exactly what the repair costs and what it covers.
Flat and Low-Slope Repairs
Heat over 100°F accelerates membrane wear on Fort Worth’s flat commercial roofs, and hail can bruise the insulation board beneath a membrane without any visible puncture. We cut out failed sections, patch with compatible membrane, and check the field for soft spots. If we find wet insulation, it’s priced and approved in writing before we cut further.
Edge Metal and Pitch Pan Repairs
High winds peel back parapet caps and edge metal that were installed with too few fasteners, and pitch pans around HVAC penetrations dry out and crack. We re-fasten, re-seal, and where needed replace with new metal so the next storm doesn’t get under the roof’s edge. Every repair includes our clean-up photo before we leave the site.
Trusted Brands We Service in Fort Worth
Birchbark Roofing works with shingles and membranes from GAF, CertainTeed, Owens Corning, and Boral, which means we can match your existing roof on repairs without forcing a full replacement. We keep common Fort Worth color lines and materials on hand for faster turnaround, especially for the composition shingles covering most post-1970s tract homes across the city. If you have a specific brand or warranty requirement, tell us on the phone and we’ll confirm the exact material and availability before scheduling.
Common Roof Repair Problems We See in Fort Worth Homes
- Hail damage that’s worse than it looks from the street. A March hailstorm in Fort Worth can crack 3-tab shingles and bruise the mat beneath them, but you won’t see the granule loss for months. By the time leaks show up, the decking often has rot that doubles the repair cost. We check impact marks on downspout screens and aluminum vents to date the storm, then look where the hail actually hit.
- Pier-and-beam settlement pulling flashing away from chimneys and walls. Older homes in Ryan Place and Fairmount settle over decades, which opens gaps at the same penetrations every year. A repair that just re-caulks the gap fails again next season. We re-bend or replace the flashing so it moves with the house.
- Undersized fascia and soffit hidden until a repair exposes rot. Many post-1970s tract homes across Fort Worth were built with the thinnest allowable fascia, and a roof repair near the eave often uncovers wood that’s past saving. When that happens, we write the replacement into a change order with a price before we proceed.
- Starter strip and drip edge that were nailed poorly to begin with. Wind peels back shingles at the perimeter when the starter strip wasn’t fastened on the nailing line, and cheap repairs that reuse damaged drip edge just set up the next failure. We inspect the roof’s edge on every repair and include new drip edge when it’s needed.
See the difference
Before
After
Before
After
Before
AfterPricing for Roof Repair in Fort Worth, TX
Here’s what our Fort Worth customers typically see on written estimates: a simple shingle replacement runs $350 to $600, a vent boot repair $250 to $450, a valley repair $500 to $1,200, a flat roof patch $450 to $950, and flashing repair around a chimney or wall $600 to $1,800. A full metal roof repair ranges $450 to $1,400 depending on fasteners and seam work. What moves the price in Fort Worth is what we find once the old material comes off: rotted decking, failed underlayment, or code upgrades for impact resistance triggered by a permit. That’s why we inspect first, write allowances into the contract, and price any surprise in writing before we touch it. Call (682) 990-0964 for a free estimate with your exact number in writing.
We Also Serve Cities Near Fort Worth
Besides covering neighborhoods across Fort Worth, our crews also handle Roof Repair in Haltom City, North Richland Hills, Hurst, and Bedford. If you’re just outside the city and want to know whether we cover your street, call (682) 990-0964 and we’ll confirm scheduling. Many jobs in the surrounding cities come to us through Fort Worth referrals, and we treat every one with the same written-price guarantee.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roof Repair in Fort Worth
You need an inspection first, and you need someone who can date the storm. Fort Worth sits in the hail belt, so after any March or April storm we look at impact marks on downspout screens and aluminum vents to pinpoint the event, then check the shingles where the hail actually struck. If you see granules in the gutters or dents on soft metal, call (682) 990-0964 and we’ll walk the roof before you file a claim.
Sometimes, and it depends on the original material. Cedar shakes on Fairmount bungalows and 3-tab shingles from the 1960s have specific sizes and exposure patterns that modern architectural shingles don’t match. We stock discontinued and specialty lines from GAF and CertainTeed, and we’ll tell you honestly if a repair will be visible or if a selective replacement in the same zone makes more sense. Call (682) 990-0964 and we’ll check what’s on your roof.
Yes, in many cases. Fort Worth code requires impact-resistant shingles on new construction and reroofs, and when a repair triggers a permit that opens a certain area, the inspector may require upgrading the affected slope. We write that upgrade into the change order with a price before any work, so the inspector’s requirement doesn’t become a surprise line item on your final bill.
A square is 100 square feet of roof area, the standard unit for pricing shingles and underlayment. When we quote a repair, we price the affected area in squares plus flashing and labor, which is why a repair covering three squares has a clear material cost. You’ll see the breakdown on our written estimate before we start, not after.
Rotted rafter tails and failed underlayment. Pier-and-beam homes settle, and that movement opens flashing gaps that let water sit against the sheathing for years. We opened up a 1920s bungalow in Fairmount and found original cedar shakes over skip sheathing with no underlayment and corroded flashing at every valley. Our crew stripped to the decking, repaired two rotted rafter tails, laid ice and water shield in the valleys, then reinstalled architectural shingles with a starter strip and new drip edge, with the permit-triggered impact-resistance upgrade priced in the change order before we touched the roof. That’s how we keep an older Fort Worth home’s repair from becoming a financial surprise.
We keep crews dispatched from the Dallas-Fort Worth office and scheduled across Fort Worth every weekday, so most repairs are scheduled within a few days of your call. For a leak that’s actively dripping into the house, call (682) 990-0964 and we’ll walk through temporary steps over the phone and get you on the schedule as soon as possible.
Yes, from the near-downtown neighborhoods like Fairmount and Ryan Place to the tract-home subdivisions on the north and south sides and commercial roofs along I-35W and Highway 287. If you’re not sure whether your ZIP is in our service area, call and ask. A live person picks up.
Prices in Fort Worth run roughly the same as Haltom City, North Richland Hills, Hurst, and Bedford, with small differences from permit fees and travel time. What actually changes your quote is the condition of the existing decking and whether the repair triggers a code upgrade to impact-resistant shingles. We’ll give you a written price based on what we find, not a vague estimate that moves later.
Call Birchbark Roofing Fort Worth Today
If your roof’s leaking, storm-damaged, or just looking worn, call (682) 990-0964 for a free written estimate. Erik Lindgren and the Birchbark team serve Fort Worth with the Cedarwell Care Promise: shoe covers and drop cloths on every visit, pet-safe product choices where available, a clean-up photo before we leave, and a 365-Day Done Right Promise on every repair.
Written by Erik Lindgren, Owner at Birchbark Roofing Fort Worth, serving Fort Worth since 2000 as part of the Cedarwell family of roofing companies.