Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in Fort Worth?
Metal roof installation in Fort Worth typically runs between $11,500 and $38,000 for a standard single-family home in 2026, with most homeowners paying around $17,500 to $24,000 for a standing seam system on a 1,800-square-foot roof. That works out to roughly $9.50 to $18.00 per square foot installed, depending on the metal profile, roof pitch, and whether the old roof needs a full tear-off. Fort Worth pricing runs slightly below the national average because of competitive labor rates across the DFW metroplex, but hail-resistance upgrades and the city’s specific wind requirements can shift your final number.
We give every homeowner in Fort Worth a written price in dollars before any work starts, so the number you see here is the number you sign. No allowances, no “we’ll see when we get up there.” If you want a precise figure for your specific roof, call (682) 990-0964 and we’ll schedule a measurement visit.
Metal Roof Installation Cost Breakdown (2026)
Here’s what a metal roof actually costs in Fort Worth right now, broken down by line item so you can see where the money goes. These ranges reflect the residential market in Tarrant County as of early 2026.
| Line Item | Typical Range (Fort Worth) | Notes |
|---|---|---|
| Standing seam metal roof (materials + labor) | $11.50 – $17.50 per sq. ft. | Most common choice for residential Fort Worth homes |
| Stone-coated steel (Decra, Boral) | $9.50 – $14.50 per sq. ft. | Good hail-resistance option for Texas storm season |
| Corrugated / exposed fastener panels | $7.50 – $11.00 per sq. ft. | Budget-friendly but higher maintenance over time |
| Aluminum shingle/shake systems | $12.00 – $18.00 per sq. ft. | Premium look; less common in Fort Worth |
| Full tear-off of existing asphalt shingles | $1.75 – $3.00 per sq. ft. | Required if you have one layer already, or two layers in older Arlington Heights homes |
| Underlayment upgrade (synthetic, high-temp rated) | $0.60 – $1.10 per sq. ft. | Worth it for Fort Worth’s summer attic temperatures |
| Roof deck repair (rotten or hail-damaged sections) | $2.50 – $4.75 per sq. ft. of repair | Older homes in Fairmount and Ryan Place often need some decking work |
| Flashing, ridge caps, drip edge | $1,800 – $3,400 total | Usually bundled into the full system quote |
| Gutter replacement (if needed) | $1,900 – $4,200 total | Optional, but common to do at the same time |
For a typical 1,800-square-foot single-story home in Fort Worth, that puts a complete standing seam installation between $20,700 and $31,500 with tear-off included. A stone-coated steel roof on the same house lands between $17,100 and $26,100. Homes in neighborhoods like Tanglewood or Westcliff with steeper pitches and multiple gables will trend toward the higher end because the crew spends more time on ridge work and safety anchoring.
Why the Range Is Wide
Metal roofing prices move around for three main reasons in Fort Worth. First, the roof’s geometry: a simple ranch in Wedgwood is a completely different job than a two-story craftsman with dormers in Mistletoe Heights. Second, the material thickness and coating system: a 24-gauge Galvalume panel with a PVDF paint finish costs more than a 26-gauge panel with a polyester coating, and the difference matters for hail season. Third, whether the existing roof comes off. Fort Worth code allows a metal roof over a single layer of asphalt in some cases, but we recommend a tear-off on nearly every job because it gives us a clear look at the decking and eliminates trapped moisture.
What Affects Metal Roof Installation Pricing in Fort Worth
No two Fort Worth roofs price out the same. Here’s what actually moves the number, based on what we see across Tarrant County every week.
- Hail-resistance ratings and Fort Worth insurance requirements. After the 2021 and 2023 hail events, many Fort Worth insurers now require Class 4 impact-rated roofing products for premium discounts. Stone-coated steel and certain standing seam profiles with thicker gauge panels qualify. These products carry a materials premium, but the insurance savings over a 20-year span often offset it.
- Roof pitch and complexity. Fort Worth homes built before 1960 in areas like Crestline and Park Hill often have steep 8/12 or 10/12 pitches, plus multiple valleys and chimney chases. Steeper roofs need more safety equipment, slower work, and more flashing fabrication. That adds $1.50 to $4.00 per square foot compared to a standard 4/12 or 5/12 pitch.
- Decking condition under the old roof. North Texas humidity and the freeze-thaw cycle around our clay-heavy soil means older plywood and plank decking sometimes rots at the eaves where gutters overflowed. If the deck needs replacement, that’s an additional cost on top of the roofing system, and you won’t know the full scope until the old roof comes off.
- Metal gauge and coating. 24-gauge steel with a Kynar 500 or PVDF coating costs about 15% to 20% more than 26-gauge with a standard polyester finish. In Fort Worth, where summer UV hits hard and hail is annual, we lean toward the heavier gauge and better coating for long-term color retention and impact resistance.
- Chimneys, skylights, and roof penetrations. Every plumbing vent, attic fan, and chimney flashing adds fabrication labor. A roof with 10 penetrations costs more than a roof with 4. Homes with a lot of venting, like those in Ridglea with original kitchens and multiple bathroom fans, run toward the higher end.
- Seasonal demand. Fort Worth’s roofing calendar peaks in spring after hail season and again in early fall before the winter rains. Scheduling a full replacement in January or February can be more flexible, and manufacturers sometimes run winter material promotions. The price per square foot doesn’t change much, but you may get faster scheduling.
How to Save on Metal Roof Installation
Saving money on a metal roof in Fort Worth comes down to making choices before you sign, not after. Here’s what we tell homeowners who ask us how to keep the number down without cutting corners.
- Get the tear-off decision right. If your current roof has one layer of asphalt shingles and the decking is sound, you may be able to install a metal system over it in some Fort Worth permitting situations. That eliminates the tear-off line item. But it’s not always the smart long-term play, and we’ll be honest with you about what we’d do on our own home.
- Choose a simpler profile. Exposed fastener panels run less per square foot than standing seam, and stone-coated steel sits in the middle. If you want the metal roof life span without the standing seam price, stone-coated steel from Decra or Boral is the sweet spot for many Fort Worth homes.
- Bundle with gutter replacement. If your gutters are nearing the end anyway, doing them at the same time as the roof saves a second mobilization and lets the crew coordinate flashing with the new gutter lines. It’s cheaper than two separate projects.
- Ask about insurance premium changes. Many Fort Worth insurers cut premiums for Class 4 impact-rated roofing. Before you pick a material, call your agent and ask what a Class 4 roof does to your annual premium. Some homeowners recover $300 to $700 a year, which changes the affordability math on a premium metal system.
- Schedule an estimate now, install later. A written estimate from us locks in the specific scope and price for a set window. If you’re thinking about a roof for late 2026, get the measurement done now so you know your number. Estimates are free – call (682) 990-0964 to set one up.
One more note on saving money: don’t do it by hiring the cheapest crew you can find. Fort Worth has a lot of storm-chasing roofing companies that set up in a hotel after a hail event and disappear by summer. A metal roof is a 40-to-70-year investment on your Fort Worth home. The wrong installation voids the manufacturer warranty and leaves you with a leak nobody will answer for. Every Birchbark Roofing job comes with a written price, a 365-Day Done Right Promise, and a company that’s been roofing in the Cedarwell family network since 2000. You’ll know who was on your roof and you’ll know what you paid before a single panel goes up.
Metal Roof Installation Cost FAQs
Is metal roofing more expensive than asphalt shingles in Fort Worth?
Yes. A full standing seam metal roof in Fort Worth costs roughly $11,500 to $38,000, while a comparable architectural asphalt shingle roof on the same home runs $9,000 to $16,500. That’s about a 40% to 60% premium up front. The trade-off is lifespan: a quality metal roof lasts 40 to 70 years in the North Texas climate, while asphalt shingles in Fort Worth typically need replacement at 15 to 20 years because of hail and UV exposure. Over a 50-year ownership window, the metal roof is often cheaper per year. Call (682) 990-0964 and we’ll put both numbers in writing for your specific roof.
How much does a metal roof cost per square foot in Fort Worth in 2026?
In 2026, Fort Worth metal roof pricing runs $9.50 to $18.00 per square foot installed, with standing seam at $11.50 to $17.50 per square foot and stone-coated steel at $9.50 to $14.50 per square foot. Exposed fastener corrugated panels are the only option that dips below $10 per square foot, and we rarely recommend them for occupied homes because of fastener maintenance. The per-square-foot number assumes standard decking and no major structural surprises. For your exact square-footage price, call (682) 990-0964 for a free measurement.
Can you install a metal roof the same day?
A full metal roof installation on a typical Fort Worth home takes 3 to 6 working days, not one day. That includes tear-off (if needed), underlayment, panel installation, flashing, and final clean-up. Very small roofs on simple ranches can sometimes be done in 2 days with a full crew. Emergency repairs, like tarping or securing loose panels after a storm, can often be done same-day – a live person answers our phones 24/7 at (682) 990-0964 if you’ve got storm damage right now.
Is it cheaper to repair a metal roof or replace it in Fort Worth?
Repair is always cheaper when the roof is otherwise sound. In Fort Worth, a metal roof repair costs between $350 and $2,800 depending on the issue: replacing a handful of hail-dented panels, resealing a leaking seam, or rebuilding flashing around a chimney. If your metal roof is over 30 years old, shows widespread rust or coating failure, or has leaked in multiple places, replacement is the better long-term spend. We’ll tell you straight which one makes sense for your roof, with a written price either way.
Does a metal roof increase home value in Fort Worth?
A standing seam metal roof generally adds $12,000 to $20,000 to the resale value of a Fort Worth home, based on appraiser comparisons and what we hear from local real estate agents who show homes in neighborhoods like Tanglewood and Westcliff. Buyers in Texas know hail damage, and a Class 4 metal roof is a selling point that shortens time on market. Exact value depends on the neighborhood comps and the age of the roof at listing time. If you’re planning to sell in the next few years, a metal roof is one of the few improvements where you recapture most of the cost.
Does Birchbark Roofing offer financing for metal roof installation?
We work with several financing partners that offer metal roof financing in Fort Worth with terms from 12 months to 15 years, and we can walk you through the monthly payment for your specific project before you commit. The monthly number is calculated from your written roof price, so you know exactly what you’re financing. Call (682) 990-0964 and we’ll send you the financing options along with your free estimate.
Why Metal Roofing Makes Sense for Fort Worth Homes
Fort Worth weather punishes roofs. The summer sun bakes asphalt shingles until they curl and lose granules. Hail season runs from March through June, and a single storm can knock an asphalt roof from “fine” to “insurance claim” in twenty minutes. Metal roofing stands up to this climate in a way that shingles simply cannot.
Our Fort Worth customers also tell us what they value beyond the material itself: knowing the crew will put down drop cloths through the hallway, wear shoe covers at the door, and photograph the clean-up before they leave. That care is standard on every Birchbark job, and it’s why we put it in writing with the Cedarwell Care Promise. Ask before we move anything. Clean up like it’s our own home. Respect quiet hours. Explain the price before the work. Those aren’t slogans; they’re the four commitments we make before anyone climbs onto your roof.
You’ll also get the 365-Day Done Right Promise, stamped on every roof we install. If something isn’t right a year later, we come back and make it right. That promise covers the full repair and replacement scope of your metal roof. Erik Lindgren, who leads our Fort Worth team, has built the business around one belief: a homeowner should never have to wonder if the roofing company is going to show up, clean up, or stand behind the work. You should know.
Pricing reflects the Fort Worth market as of 2026. Birchbark Roofing Fort Worth offers free estimates – call (682) 990-0964.
Written by Erik Lindgren, Owner at Birchbark Roofing Fort Worth, serving homeowners across Tarrant County since 2000.
What Our Customers Say
"Fixed lifted shingles and cleaned the gutters while up there. Gentle around the flower beds and swept the driveway clean. Calm, respectful crew."
- Opal Merchant"Roof repair after a leak. What won me over was the cleanup, they ground sheeted the flower beds so no debris fell in, and they ran a magnet over the whole yard for nails. Careful crew."
- Gordon Fiske"Full replacement. They protected the landscaping and the patio furniture before they started tearing off. Finished when they said and the yard was cleaner after than before."
- Reba Santoyo