Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roofing Company Across Haltom City
If you’re looking for a Roofing Company in Haltom City that shows up with a written price and a clean-up plan, we’re the crew your neighbors call. Birchbark Roofing Fort Worth serves the brick ranches and split-levels across Haltom City with roof repair, replacement, and inspection work backed by a 365-Day Done Right Promise. Call (682) 990-0964 and a live person answers, day or night. We know Haltom City’s homes, we know its weather, and we know what the city inspector expects before that final sign-off.
Why Birchbark Roofing Fort Worth Is Haltom City’s Preferred Roofing Company
Haltom City homeowners deal with a specific set of realities: 1960s-era ranch homes with original decking, spring hailstorms that turn into insurance claims, and a building inspection process that holds every reroof to the 2018 IRC wind standard. We’ve worked enough roofs here to know which neighborhoods east of Denton Highway show the worst hail impact patterns, and which 1970s split-levels have the soft spots around vent stacks. Erik Lindgren, who leads our team, insists every Haltom City job includes a written price before work starts, background-checked uniformed technicians, and a clean-up photo before the crew pulls away.
We’re part of the Cedarwell family of roofing businesses, which means every Haltom City roof we touch carries the Cedarwell Care Promise. That promise is specific: shoe covers at the door, drop cloths through the hallway, pet-safe product choices where there’s a choice, and debris cleared and photographed before we leave. No handshake deals, no surprise change orders. Just a roof done to the city’s code requirements, with documentation your insurance adjuster can actually use.
Styles & brands we work with






Roof Inspection in Haltom City
A Roof Inspection in Haltom City is the cheapest insurance you’ll buy against a denied claim, and here’s why: the city’s housing stock is old enough that most roofs are one good storm away from a problem. We walk the entire roof surface, check the decking from the attic side where accessible, inspect flashing at every penetration, and document granule loss, nail pops, and soft spots. Most inspections run $175 – $350 depending on roof size and access. For Haltom City specifically, we always photograph the vents, valleys, and drip edges, because those are the spots the city’s inspector flags first.
Storm-Damage Documentation
After a hailstorm rolls through Haltom City, your insurance company wants proof of the impact date. Our inspection report includes dated photos, specific shingle counts for impact bruising, and a written summary tied to the storm event. We’ll even label the permit card when a claim moves forward, so your adjuster sees a clean paper trail.
Pre-Purchase Inspections
Buying a 1970s ranch off Haltom Road? Let us walk the roof before you close. We’ll tell you how many seasons are left, whether the decking has water damage from old leaks, and what a compliant replacement would cost. That number goes in writing, which strengthens your negotiation.
Commercial Roofing in Haltom City
Commercial Roofing in Haltom City covers the low-slope and flat roofs on the warehouses along Loop 820, the retail strips off Denton Highway, and the small office buildings near Broadway Avenue. These buildings face the same hail and wind as the residential streets, but their roofs fail differently: ponding water after heavy rain, lifted seams from wind uplift, and punctures from HVAC service traffic. Commercial roof repairs in Haltom City typically run $850 – $2,500 depending on the membrane type and damage scope, while full replacements run $6.50 – $9.00 per square foot installed. You’ll see your exact number in writing before any work begins.
Wind-Uplift Compliance
Haltom City enforces the 110 mph wind design speed for commercial structures too. That means membrane fastening patterns and edge metal details are not optional extras. We spec the fastening schedule to the specific membrane’s wind rating, and we photograph the installation before cover boards go down, so the building owner has proof for their insurer.
Scheduling Around Business Hours
We understand a roofing crew on a retail strip is a disruption. Where possible, we schedule tear-off and loud work outside business hours, coordinate roof access with your staff, and make sure every nail and scrap of old membrane is magnet-swept from the parking lot before the crew leaves. That clean-up photo is part of the Cedarwell Care Promise, and it’s part of every commercial job we run in Haltom City.
Trusted Brands We Service in Haltom City
We work with GAF, CertainTeed, and Owens Corning materials on most Haltom City jobs, because all three carry product lines rated for the 110 mph wind design speed the city enforces. Specifically, CertainTeed’s Landmark architectural shingle and GAF’s Timberline line both carry high-wind ratings when installed with the manufacturer’s required nailing pattern, which the city inspector will verify. We stock local parts and fasteners specific to these systems, so if a repair needs matching shingles or proper ring-shank nails, we’re not waiting on a warehouse in Fort Worth. Your roof goes on faster, to spec, with a warranty the manufacturer actually honors.
See the difference
Before
After
Before
After
Before
AfterCommon Roofing Company Problems We See in Haltom City Homes
- 4-nail patterns on architectural shingles. Out-of-town crews quote a cheaper job by skipping the 6-nail ring-shank pattern. That roof will not hit the 110 mph wind rating, and Haltom City’s inspector will fail it on final. We quote the compliant pattern every time.
- Missing drip edge on 1960s ranches. Many Haltom City homes were built before drip edge was standard. Skipping it lets water wick into the fascia, and the city now requires it at eaves and rakes. Some crews leave it off to save a few hundred dollars. We don’t.
- Reused flashing around plumbing vents. Old flashing on a 50-year-old roof is almost never worth saving. But pulling and replacing it adds labor, so cheaper bids reuse it. The next hailstorm finds those weak points. We replace flashing on every job where it’s worn.
- Soft decking discovered mid-job with no plan. Haltom City’s older roofs often hide rotted plywood around vents and valleys. A cheap quote doesn’t include decking replacement, then hits you with a change order. Our written price includes a decking allowance per sheet, spelled out before we start.
Pricing for Roofing Company in Haltom City, TX
A full architectural shingle reroof on a typical 1,600 – 2,200 square foot Haltom City ranch runs $11,500 – $16,800 total, including tear-off, underlayment, drip edge, flashing, and the city permit. Roof repairs run $425 – $1,800 for most issues: a leak around a vent stack, a storm-damaged section, missing shingles. The factors that move your price: roof pitch, decking condition, number of penetrations, and whether you need the high-wind underlayment system, which Haltom City requires on every reroof. Cheap bids that come in under $9,500 for a full roof are almost always cutting one of these required components. Call (682) 990-0964 for a written quote that lines up with what the inspector will check.
We Also Serve Cities Near Haltom City
Our crews run to Fort Worth, North Richland Hills, Hurst, and Bedford most weeks, and we’re glad to look at roofs across the Haltom City metro edge. If you’re in a neighboring community and want the same written-price, clean-up-photo approach, Roofing Company in Haltom City standards travel with us. Call (682) 990-0964 and we’ll schedule a walk-through at your place.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roofing Company in Haltom City
Haltom City requires one roof permit, but the final inspection on that permit includes wind-load compliance checks: nailing pattern, underlayment lap, and drip edge. There is no separate wind mitigation certificate required for a standard reroof. However, make sure your contractor documents the compliant installation with photos and the signed permit card, because that paper trail is what your insurance company wants to see when you ask about premium adjustments. Call (682) 990-0964 and we’ll walk you through what the inspector checks.
CertainTeed Landmark and GAF Timberline architectural shingles both carry high-wind ratings that meet or exceed Haltom City’s 110 mph design speed, when installed with the manufacturer’s required 6-nail ring-shank pattern and a proper high-wind underlayment system. Owens Corning Duration also carries a wind rating, though the specific installation details differ by product line. The brand matters less than the installation spec. Ask for the written quote to list the nailing pattern and underlayment by name.
These older homes almost always have original plywood decking that’s been through 40 to 60 years of North Texas heat and hail. We regularly find soft spots around vent stacks and roof valleys, plus missing drip edge that newer homes already have. That means a compliant re-roof on an older Haltom City ranch often includes some decking replacement and new drip edge at the eaves and rakes, which a cheap quote often omits. We build that into the written price before we start.
The inspector confirms three things: the underlayment is a high-wind rated system with proper overlap, the shingles are fastened with the manufacturer’s required pattern for the 110 mph wind rating, and drip edge is installed at all eaves and rakes. If any of those three is missing, the final inspection fails and you’re calling the contractor back. We label the permit card with the exact materials and nail pattern used, so the inspector sees a compliant assembly from the start.
In many cases, yes. Haltom City’s compliance with the 110 mph wind standard means your new roof meets a documented wind rating. Present your insurer with the signed permit card, photos of the underlayment and nailing pattern, and the shingle warranty, and you’ll often qualify for a wind-mitigation discount without needing a separate engineering certificate. The key is documentation, which is why we photograph every step and hand you a clean file at the end of the job. Call (682) 990-0964 for an exact quote on your Haltom City roof.
Written by Erik Lindgren, Owner at Birchbark Roofing Fort Worth, serving Haltom City with written-price roofing and the 365-Day Done Right Promise.